Focal Auditor ACX 165 2-Way Coaxial Speaker Pair 60W RMS
₹11,999.00
₹10,200.00
Focal Auditor ACX 165 is a 2-way coaxial pair designed for car audio. Best for replacing compatible door or rear speakers without a separate tweeter position. The coaxial construction reduces mounting complexity, but the speaker must still be sealed against the door trim.
Key strengths and best application
165 mm coaxial drivers with centrally mounted Mylar inverted-dome tweeters. Keep rear-fill levels lower than the front stage where imaging matters. Check grille clearance over the coaxial tweeter before refitting trim.
Fitment and system planning
Before ordering, check the factory cut-out, bolt pattern, door glass movement, trim/grille clearance, supplied crossover and available amplifier channels. Nominal diameter alone does not confirm fitment. Not sure it fits? Contact VA3 Car Studio with your car's make, model and year before you order.
Specifications
| Brand | Focal |
| Series | Auditor |
| Model | ACX 165 |
| Configuration | 2-way coaxial pair |
| What's included / driver format | 165 mm coaxial drivers with centrally mounted Mylar inverted-dome tweeters |
| Power handling | 60 W RMS / 120 W maximum |
| Nominal impedance | 4 Ω |
| Sensitivity | 91.5 dB |
| Published frequency range | 60 Hz–21 kHz |
| Cone material | Polypropylene |
| Mounting depth | 62.5 mm |
Source: Focal's official product information. Technical figures are published specifications, not independent in-car acoustic measurements. Please confirm vehicle fitment with us before purchase.
Need help choosing? Read our Focal ACX 165 review and installation guide.
Quantity
Technical Specs
| Brand | Focal |
| Series | Auditor |
| Model | ACX 165 |
| Configuration | 2-way coaxial pair |
| What's included / driver format | 165 mm coaxial drivers with centrally mounted Mylar inverted-dome tweeters |
| Power handling | 60 W RMS / 120 W maximum |
| Nominal impedance | 4 Ω |
| Sensitivity | 91.5 dB |
| Published frequency range | 60 Hz–21 kHz |
| Cone material | Polypropylene |
| Mounting depth | 62.5 mm |
Fitment and installation
165 mm coaxial for factory speaker locations. Confirm central tweeter clearance behind the factory grille, cut-out, screw positions and door-panel sealing. No separate tweeter mounting is required.
Vehicle and factory-audio-package fitment must be confirmed before purchase. Professional installation and system tuning available at Velocity Auto in Ghaziabad.
Research and buying guide
Manufacturer engineering parameters
Rdc 3.3 Ω; Fs 80 Hz; Vas 9 L; Qts 0.95; Qes 1.20; Qms 7; Mms 12.3 g; Sd 132 cm²; cut-out Ø144 mm; mounting depth 62.5 mm.
Source: Focal official technical sheet. These are individual driver parameters, not a substitute for vehicle-specific acoustic measurements or shipping-weight calculations.