Focal Auditor ACX 100 2-Way 4-Inch Coaxial Speaker Pair 30W RMS
₹9,999.00
₹8,500.00
Focal Auditor ACX 100 is a 2-way 100 mm coaxial pair designed for car audio. For small dashboard, door or rear-side speaker openings where a full 165 mm driver will not fit. The smaller cone limits bass capability at higher volume.
Key strengths and best application
compact 100 mm coaxial drivers. Use appropriate bass management so the small speaker does not receive excessive low-frequency energy. Inspect dash grille height and potential windscreen reflections.
Fitment and system planning
Before ordering, check the factory cut-out, bolt pattern, door glass movement, trim/grille clearance, supplied crossover and available amplifier channels. Nominal diameter alone does not confirm fitment. Not sure it fits? Contact VA3 Car Studio with your car's make, model and year before you order.
Specifications
| Brand | Focal |
| Series | Auditor |
| Model | ACX 100 |
| Configuration | 2-way 100 mm coaxial pair |
| What's included / driver format | compact 100 mm coaxial drivers |
| Power handling | 30 W RMS / 60 W maximum |
| Nominal impedance | 4 Ω |
| Sensitivity | 88 dB |
| Published frequency range | 80 Hz–21 kHz |
| Cone material | Polypropylene |
| Mounting depth | 48.2 mm |
Source: Focal's official product information. Technical figures are published specifications, not independent in-car acoustic measurements. Please confirm vehicle fitment with us before purchase.
Need help choosing? Read our Focal ACX 100 review and installation guide.
Quantity
Technical Specs
| Brand | Focal |
| Series | Auditor |
| Model | ACX 100 |
| Configuration | 2-way 100 mm coaxial pair |
| What's included / driver format | compact 100 mm coaxial drivers |
| Power handling | 30 W RMS / 60 W maximum |
| Nominal impedance | 4 Ω |
| Sensitivity | 88 dB |
| Published frequency range | 80 Hz–21 kHz |
| Cone material | Polypropylene |
| Mounting depth | 48.2 mm |
Fitment and installation
Compact 100 mm coaxial for suitable dash or rear locations. Confirm shallow mounting clearance and grille height; use an appropriate high-pass because it is not a deep-bass driver.
Vehicle and factory-audio-package fitment must be confirmed before purchase. Professional installation and system tuning available at Velocity Auto in Ghaziabad.
Research and buying guide
Manufacturer engineering parameters
The ACX 100 official driver sheet specifies Rdc 3.3 Ω, Fs 95 Hz, Vas 2 L, Qts 0.70, Qes 0.75, Qms 7.5, Mms 6.2 g and Sd 50 cm². Those are especially relevant when deciding its protective high-pass: it is a compact 100 mm coaxial, not a low-frequency door woofer.
Original Focal driver technical sheet. These are driver-level engineering parameters, not boxed shipping weight.