AudioControl EPICXV8 Review: Specifications, Fitment and Comparisons
Quick summary: the buying decision
The EPICXV8 is a ready-to-install vented enclosure loaded with an EPICX Series subwoofer, rated at 400 W RMS / 600 W max into 1 ohm. It saves designing and building a box; check the external dimensions against your boot or cabin space and choose a mono amplifier that is stable at 1 ohm.
AudioControl EPICXV8: what it is
The AudioControl EPICXV8 is a loaded, vented subwoofer enclosure fitted with an 8-inch EPICX subwoofer, rated at 400 W RMS (600 W max) into 1 ohm. It has a carpeted exterior, a removable insert panel and an adaptive terminal cup for flexible installation.
The adaptive terminal cup lets the installer choose which side the terminal sits on, and the EPICX subwoofer inside uses a composite foam surround and a high-temperature, lightweight voice coil. Like the rest of the EPICX range, it is designed to pair with AudioControl's The Epicenter bass restoration processor.
Key features
Carpeted exterior finish for a durable, factory-like look
Removable, customisable insert panel
Adaptive terminal cup lets the installer choose which side the terminal sits on; large-gauge quick-release black nickel terminals
EPICX subwoofer with a composite foam surround and a high-temperature, lightweight voice coil
Designed to pair with AudioControl's The Epicenter bass restoration processor
Specifications explained
AudioControl rates the EPICXV8 at 400 W RMS / 600 W max into 1 ohm, with a tuning frequency of 38 Hz and a suggested low-pass filter of 85 Hz.
External size: width 333 mm (13.11 in), height 316 mm (12.44 in), depth 269 mm (10.6 in) / 362 mm (14.25 in) (top / bottom), weight 12.25 kg (27 lb).
Full specifications as published by AudioControl:
Model: EPICXV8
Type: Loaded vented subwoofer enclosure, 8 in
Subwoofer: 8 in (200 mm) EPICX
Power handling: 400 W RMS / 600 W max
Impedance: 1 ohm
Voice coil: 2 in (50 mm)
Tuning frequency: 38 Hz
Suggested low-pass filter: 85 Hz
Width: 333 mm (13.11 in)
Height: 316 mm (12.44 in)
Depth (top / bottom): 269 mm (10.6 in) / 362 mm (14.25 in)
Weight: 12.25 kg (27 lb)
In the box: EPICXV8 loaded subwoofer enclosure, user manual
Space and fitment
Measure the boot or cabin space with the seats and boot floor in their normal positions, and allow room for the terminal and wiring. The EPICXV8 is 333 mm (13.11 in) wide, 316 mm (12.44 in) high and 269 mm (10.6 in) / 362 mm (14.25 in) deep (top / bottom). Secure it so it cannot move under braking: a loose enclosure is a safety hazard and causes rattles.
Amplifier matching and set-up
It is rated into 1 ohm, so it needs a mono amplifier that is stable at 1 ohm. AudioControl's EPIC750 (750 W at 1 ohm) works if its gain is set so the enclosure stays within its 400 W RMS rating.
AudioControl suggests a low-pass filter at 85 Hz; add a subsonic filter a little below the 38 Hz tuning to protect the driver.
How it compares
Related options at VA3 Car Studio:
AudioControl EPICXV12: loaded vented subwoofer enclosure, 12 in, 500 W RMS / 750 W max, 1 ohm, ₹46,740
AudioControl SPK-V12: loaded vented subwoofer enclosure, 12 in, 500 W RMS, 2 ohm, ₹70,540
AudioControl SPC-W10: loaded sealed wedge subwoofer enclosure, 10 in, 400 W RMS, 2 ohm, ₹50,990
AudioControl EPICX8D4: 8 in, dual 4 ohm, 400 W RMS / 600 W max, mounting depth 103.9 mm, ₹16,990
The bare EPICX8D4 driver (the dual 4-ohm version of the same series) costs less if you build a box to AudioControl's recommendations, while the loaded enclosure saves design and build time and arrives finished.
Price and value in India
At the time of writing (October 2026), VA3 Car Studio lists the EPICXV8 at ₹34,840, 15% below the MRP of ₹40,990. The price includes a finished, matched enclosure, which saves custom box-building time. Prices can change, so the product page always shows the current price.
Verdict: who should shortlist the EPICXV8
Shortlist the EPICXV8 if you want a finished, matched subwoofer enclosure without a custom build, and you have confirmed the dimensions fit. Pair it with a mono amplifier that is stable at 1 ohm.
Real-world reviews and limitations
We have not yet published a VA3 installation report for the EPICXV8. The figures in this review are AudioControl's published specifications, not our own measurements, and real-world results depend on the cabin, the amplifier and the tune. If you have used one, we would welcome your feedback.
Frequently asked questions
What impedance is the EPICXV8?
1 ohm; choose a mono amplifier that is stable at that load.
How much power does the EPICXV8 handle?
AudioControl rates it at 400 W RMS / 600 W max.
What are the dimensions of the EPICXV8?
Width 333 mm (13.11 in), height 316 mm (12.44 in), depth 269 mm (10.6 in) / 362 mm (14.25 in) (top / bottom).
Is the EPICXV8 sealed or ported?
It is a vented (ported) enclosure.
Comments