Morel Tempo Ultra Integra 602 MKII Review: Point-Source Coaxial With External Crossovers
The Morel Tempo Ultra Integra 602 MKII is a 6.5-inch point-source coaxial from Morel's Tempo Ultra MKII range. Its soft dome tweeter sits at the centre of the woofer, with external crossovers handling the split. It is rated at 120 W RMS (220 W peak) with 90 dB sensitivity and a 50 Hz to 22 kHz response. Its India MRP is ₹25,990, twice that of the Maximo Ultra Coax 602 MKII. It suits owners who want more power handling and a proper outboard crossover without cutting holes for separate tweeters, usually with an amplifier behind it. You can see today's price on our Morel Tempo Ultra Integra 602 MKII product page.
Key takeaways
Point-source layout: tweeter at the woofer's centre, so one hole per side, but with external crossovers like a component set.
Rated 120 W RMS, against 90 W for the Maximo Ultra Coax 602 MKII, so it can take more amplifier power.
Crutchfield lists a 68 mm mounting depth and no grilles in the box, so check depth and plan to reuse factory grilles.
The one owner review we could read calls it a high-quality pair with clear, clean sound at mid and high volume.
Morel Tempo Ultra Integra 602 MKII specifications
Specification | Morel Tempo Ultra Integra 602 MKII |
|---|---|
Type | 6.5-inch point-source (Integra) coaxial (pair) |
Woofer | Treated paper composite cone, butyl rubber surround, steel basket |
Woofer voice coil | 1.5-inch, per our listing |
Tweeter | Soft dome: 1.1-inch per our listing, 1-inch silk per Crutchfield |
Crossovers | External |
Power handling | 120 W RMS / 220 W peak |
Sensitivity | 90 dB (2.83 V / 1 m) |
Frequency response | 50 Hz – 22 kHz |
Impedance | 4 Ω |
Mounting depth | About 68 mm (2-11/16 in) |
Cutout diameter | About 146 mm (5-3/4 in) |
Grilles | Not included |
India MRP | ₹25,990 |
Ratings, voice coil and tweeter description come from our store listing. Construction, crossover, depth and grille details come from the spec sheets at Crutchfield and OnlineCarStereo, which also gives the cutout. Our listing and Crutchfield disagree on the tweeter size, and Morel's own page wasn't reachable to settle it when we checked in October 2026.
What point-source means, and what it doesn't
Morel's Integra layout puts the tweeter at the centre of the woofer. Sound from both drivers then starts from roughly the same point, which helps the two blend smoothly as you move around the cabin. That is the main argument for a point-source design over a coaxial with the tweeter perched on a bridge. Crutchfield's product write-up adds a practical benefit: the point-source design lets these speakers fit more vehicles.
What it doesn't do is lift the tweeter out of the door. Like any coaxial in a door, the highs still come from low down, so the soundstage sits lower than a component set with A-pillar tweeters. The external crossovers are the other half of the story. They do the filtering that a component set's crossover boxes would, and you will need dry places to mount them.
Head unit or amplifier?
With 90 dB sensitivity and a 120 W RMS rating, this is a speaker that wants an amplifier. A head unit will drive it, but only a small fraction of that rating, and at volume a head unit's built-in amplifier runs out of clean power long before the speaker does. A four-channel amplifier with honest output in the range of the speaker's rating is the sensible pairing. High-pass the woofers around 80 Hz and add a subwoofer for the bottom octave.
If you're thinking of a DSP, check how the crossovers connect before planning an active setup. VA3 Car Studio does DSP tuning, and our DSP explainer covers what time alignment and equalisation add in a car.
What owners and reviewers say about the Morel Tempo Ultra Integra 602 MKII
When we checked in October 2026, published feedback on this exact model was limited. On Crutchfield's Canadian store, it shows an average of 5.0 out of 5, with one review visible; we couldn't see a total count. That owner says the speakers were a direct fit in their car using the supplied adapters and speaker connections. They call it a high-quality coaxial pair that sounds clear and clean at both mid and high volumes, and say it lives up to Morel's reputation for quality.
Crutchfield's listing also notes that the speaker is featured in its Best car speaker lines for 2024 article. That's retailer editorial rather than an owner review. OnlineCarStereo's listing had no reviews. One positive owner review is encouraging but thin; if you own a pair, we'd like to hear how it performs in an Indian car.
Integra 602 MKII vs Tempo Ultra 602 MKII and Maximo Ultra Coax 602 MKII
The component Tempo Ultra 602 MKII is the same range with separate tweeters. OnlineCarStereo lists it at 130 W RMS (250 W peak) and 90 dB, with a 1-1/8-inch silk tweeter and 55 Hz to 22 kHz. That is 10 W more power handling, and tweeters you can mount high for better imaging. On paper the Integra reaches lower, to 50 Hz against 55 Hz, and it installs like a coaxial.
The Maximo Ultra Coax 602 MKII (₹12,990) is the simpler coaxial: 90 W RMS, 91 dB, 55 Hz to 20 kHz, an integrated crossover and grilles included. It is a little more sensitive and easier to fit. The Integra adds external crossovers, 30 W more power handling and a wider published response, for twice the MRP.
Who should buy it, and who shouldn't
Buy it if you want a coaxial-style install with component-style external crossovers, you'll run an amplifier, and you'd rather not cut holes for separate tweeters. It also suits cars where the door is the only practical speaker location.
Look elsewhere if you want the best imaging from the front seats; the component Tempo Ultra 602 MKII lets you place tweeters high. Look elsewhere too if you'll stay on head-unit power, where the cheaper, slightly more sensitive Maximo Ultra Coax 602 MKII makes more sense.
Installation notes for Indian cars
At about 68 mm, the mounting depth is the first thing to check: measure from the mounting face to the window glass with the window fully down. OnlineCarStereo gives a cutout of about 146 mm. Factory mounts vary, and VA3 Car Studio builds door baffles to space the speaker out or give it a firm seat where the factory bracket is weak. Damp the door while it's open; our damping guide shows how.
Because grilles aren't included, plan to reuse the factory grilles and check they clear the speaker. Mount the external crossovers somewhere dry, such as a kick panel or under the dash, never in the wet part of the door, and secure them so they don't rattle on rough roads. VA3 Car Studio offers professional installation in Ghaziabad.
Price and where to buy
The Morel Tempo Ultra Integra 602 MKII carries an MRP of ₹25,990. We often sell below MRP, so check the current price on the Tempo Ultra Integra 602 MKII store listing. Every pair we sell is a genuine Morel product.
The bottom line
The Integra 602 MKII is for buyers who want more than a basic coaxial: point-source drivers, external crossovers and a 120 W RMS rating, in a speaker that still goes into the factory door location. It needs an amplifier, a check of door depth and a plan for grilles. The one owner review we found is positive, but more owner feedback would help.
Morel Tempo Ultra Integra 602 MKII FAQ
Is the Morel Tempo Ultra Integra 602 MKII a coaxial or a component set?
It is a coaxial in layout, with the tweeter at the centre of the woofer, but it uses external crossovers like a component set. That gives you one hole per side with outboard filtering.
Does it come with grilles?
No. Crutchfield and OnlineCarStereo both list grilles as not included, so plan to reuse your factory grilles and check they clear the speaker.
Does it need an amplifier?
It will play from a head unit, but with 90 dB sensitivity and a 120 W RMS rating it is best on an amplifier. Pair it with a four-channel amplifier and high-pass the woofers.
Comments