AudioControl EPIC2000 Review: Specifications, Installation and Comparisons
Quick summary: the buying decision
The EPIC2000 is a 1-ohm-stable Class D monoblock from AudioControl's EPIC series: 800 W RMS at 4 ohm, 1,400 W RMS at 2 ohm and 2,000 W RMS at 1 ohm. It includes an ACR-E remote bass knob and EPIC Boost bass EQ, and it takes line-level inputs, so a factory head unit needs a line output converter.
AudioControl EPIC2000: what it is
The AudioControl EPIC2000 is a compact, 1-ohm stable Class D monoblock subwoofer amplifier from the EPIC series, delivering 800 W RMS at 4 ohm, 1,400 W RMS at 2 ohm and 2,000 W RMS at 1 ohm. An ACR-E remote bass knob is included.
EPIC monoblocks share 12 dB/octave Linkwitz-Riley low-pass (40 to 180 Hz) and subsonic (off to 50 Hz) filters, EPIC Boost (30 to 80 Hz, 0 to 12 dB), an Epicenter Link for AudioControl's The Epicenter bass restoration processor, smart auto-reset protection and an included ACR-E remote.
Key features
12 dB/octave Linkwitz-Riley variable low-pass filter (40 – 180 Hz) and variable subsonic filter (off to 50 Hz)
EPIC Boost variable-frequency bass boost: 30 – 80 Hz centre, 0 to 12 dB of gain
Built for The Epicenter bass restoration processor; Epicenter Link harness included
Smart auto-reset protection: over-current, over-voltage, under-voltage, DC-offset and over-temperature
Solid power and speaker terminals with hex screws
Specifications explained
Rated power at 14.4 V is 800 W at 4 ohm, 1,400 W at 2 ohm and 2,000 W at 1 ohm, and two amplifiers can be strapped for 1 x 4,000 W at 2 ohm. AudioControl quotes a frequency response of 10 Hz – 190 Hz and a signal-to-noise ratio of 92.9 dBA (ref. 800 W at 4 ohm).
Line-level inputs accept 500 mV – 12 V RMS.
Full specifications as published by AudioControl:
Model: EPIC2000
Type: Monoblock Class D subwoofer amplifier
RMS power at 14.4 V, 4 ohm: 1 x 800 W
RMS power at 14.4 V, 2 ohm: 1 x 1,400 W
RMS power at 14.4 V, 1 ohm: 1 x 2,000 W
Bridged (strapped) power, 2 ohm: 1 x 4,000 W
Strappable: Yes
Line-level inputs: 500 mV – 12 V RMS
Frequency response (±1 dB): 10 Hz – 190 Hz
Signal-to-noise ratio: 92.9 dBA (ref. 800 W at 4 ohm)
Low-pass filter: 12 dB/octave Linkwitz-Riley, 40 – 180 Hz
Subsonic filter: 12 dB/octave Linkwitz-Riley, off to 50 Hz
EPIC Boost: 30 – 80 Hz, 0 to 12 dB
Power / ground wire: 0/1 AWG
Speaker terminal wire: 4 AWG
Recommended fuse: 200 A
Remote level control: ACR-E (included)
Epicenter Link: Yes
Dimensions (W x L x H): 6.1 x 12.56 x 2.01 in
In the box: EPIC2000, wrench, screws, ACR-E remote level control and cable, Epicenter Link (1 m harness), manual, warranty card
Matching subwoofers and impedance
Decide the final impedance first: power rises as impedance falls, from 800 W at 4 ohm to 2,000 W at 1 ohm. Its 1,400 W at 2 ohm or 2,000 W at 1 ohm suit multiple high-power subwoofers; add up the RMS ratings of the subwoofers at the final impedance and set the gain so no driver is pushed past its rating.
Filters, EPIC Boost and remote
Set the low-pass filter to blend with the front speakers and use the subsonic filter to protect subwoofers, especially in ported boxes. EPIC Boost adds up to 12 dB around a chosen frequency between 30 and 80 Hz; every 3 dB of boost needs twice the power, so use it carefully. The included ACR-E remote adjusts bass level from the driver's seat.
Wiring, fusing and the electrical system
AudioControl specifies 0/1 AWG power and ground wire, 4 AWG speaker wire at the terminals and a 200 A fuse. Fit the main fuse close to the battery and keep the ground short and on bare metal. The amplifier measures 6.1 x 12.56 x 2.01 in (W x L x H).
How it compares
Other subwoofer amplifiers at VA3 Car Studio:
AudioControl EPIC750: 1 x 300 W RMS at 4 ohm, 1 x 500 W at 2 ohm, 1 x 750 W at 1 ohm, ₹27,190
AudioControl EPIC1000: 1 x 400 W RMS at 4 ohm, 1 x 700 W at 2 ohm, 1 x 1,000 W at 1 ohm, ₹33,990
AudioControl EPIC4000: 1 x 1,000 W RMS at 4 ohm, 1 x 2,000 W at 2 ohm, 1 x 4,000 W at 1 ohm, ₹89,240
AudioControl A800.1: 1 x 400 W RMS at 4 ohm, 1 x 600 W at 2 ohm, 1 x 800 W at 1.33 ohm, ₹42,490
AudioControl A1500.1: 1 x 600 W RMS at 4 ohm, 1 x 1,200 W at 2 ohm, 1 x 1,500 W at 1 ohm, ₹55,240
Price and value in India
At the time of writing (October 2026), VA3 Car Studio lists the EPIC2000 at ₹59,490, 15% below the MRP of ₹69,990. The EPIC range gives a lot of power per rupee; remember to budget for wiring and, at higher outputs, electrical upgrades. Prices can change, so the product page always shows the current price.
Verdict: who should shortlist the EPIC2000
The EPIC2000 suits high-output builds with several subwoofers, where the electrical system has been planned to support it.
Real-world reviews and limitations
We have not yet published a VA3 installation report for the EPIC2000. The figures in this review are AudioControl's published specifications, not our own measurements, and real-world results depend on the installation, the wiring and the tune. If you have used one, we would welcome your feedback.
Frequently asked questions
How much power does the EPIC2000 deliver?
800 W RMS at 4 ohm, 1,400 W RMS at 2 ohm and 2,000 W RMS at 1 ohm (14.4 V).
Is the EPIC2000 1-ohm stable?
Yes. AudioControl rates it at 2,000 W RMS at 1 ohm.
Does the EPIC2000 include a bass remote?
Yes. An ACR-E remote level control and cable are included.
Can the EPIC2000 connect to a factory head unit?
Its inputs are line level (500 mV – 12 V RMS). With a factory head unit, use a line output converter such as the AudioControl LC2i PRO.
Comments