AudioControl EPICBIGFOUR Review: Specifications, Installation and Comparisons
Quick summary: the buying decision
The EPICBIGFOUR is a compact, high-current Class D amplifier from AudioControl's EPIC series: 4 x 200 W RMS at 4 ohm, 4 x 350 W RMS at 2 ohm and 2 x 650 W bridged at 4 ohm. Its inputs are line level (500 mV – 12 V RMS), so with a factory head unit plan a line output converter such as the LC2i PRO.
AudioControl EPICBIGFOUR: what it is
The AudioControl EPICBIGFOUR is a compact, high-current Class D 4-channel amplifier rated at 1,400 W RMS: 4 x 200 W at 4 ohm, 4 x 350 W at 2 ohm or 2 x 650 W bridged at 4 ohm. An ACR-E remote bass knob is included.
EPIC amplifiers are built for high output from a small chassis, with smart auto-reset protection (over-current, over-voltage, under-voltage, DC offset and over-temperature) and hex-screw direct-wire terminals. The EPICBIGFOUR is the more powerful 4-channel, with high-pass and low-pass filters on its channels, an included ACR-E remote and an Epicenter Link.
Key features
12 dB/octave Linkwitz-Riley variable high-pass and low-pass filters (off or 50 Hz to 5,000 Hz)
EPICENTER Link: compatible with The Epicenter bass restoration processor
Smart auto-reset protection: over-current, over-voltage, under-voltage, DC-offset and over-temperature
4-gauge power and 8-gauge speaker terminals with hex-screw direct-wire connections
Line-level inputs from 500 mV to 12 V RMS; 2-ohm stable
Specifications explained
Rated power at 14.4 V is 4 x 200 W at 4 ohm and 4 x 350 W at 2 ohm, with 2 x 650 W bridged at 4 ohm. AudioControl quotes a frequency response of 10 Hz – 22 kHz and a signal-to-noise ratio of 89 dBA (ref. 200 W at 4 ohm).
It has a high-pass filter (12 dB/octave Linkwitz-Riley, off or 50 – 5,000 Hz) and a low-pass filter (12 dB/octave Linkwitz-Riley, off or 50 – 5,000 Hz).
Full specifications as published by AudioControl:
Model: EPICBIGFOUR
Type: 4-channel Class D amplifier
RMS power at 14.4 V, 4 ohm: 4 x 200 W
RMS power at 14.4 V, 2 ohm: 4 x 350 W
Bridged power, 4 ohm: 2 x 650 W
Line-level inputs: 500 mV – 12 V RMS
Frequency response (±1 dB): 10 Hz – 22 kHz
Signal-to-noise ratio: 89 dBA (ref. 200 W at 4 ohm)
High-pass filter: 12 dB/octave Linkwitz-Riley, off or 50 – 5,000 Hz
Low-pass filter: 12 dB/octave Linkwitz-Riley, off or 50 – 5,000 Hz
Power / ground wire: 4 AWG
Speaker terminal wire: 8 AWG
Recommended fuse: 150 A
Dimensions (W x L x H): 6.1 x 10.56 x 2.01 in
In the box: EPICBIGFOUR, wrench, screws, ACR-E remote level control and cable, manual, warranty card
Inputs and system planning
The EPICBIGFOUR takes line-level inputs (500 mV – 12 V RMS). With an aftermarket head unit, connect its RCA preamp outputs. With a factory head unit, a line output converter such as the LC2i PRO or LC7i PRO converts the speaker-level signal first. Being 2-ohm stable, it can drive pairs of 4-ohm speakers in parallel, or bridged pairs at 4 ohm.
Filters and bass control
Use the high-pass filters to keep deep bass out of door speakers and let them play louder with less strain. The low-pass filter lets a bridged pair drive a subwoofer, and the included ACR-E remote adjusts bass level from the driver's seat; the EPICENTER Link works with AudioControl's The Epicenter bass restoration processor.
Wiring and fusing
AudioControl specifies 4 AWG power and ground wire, 8 AWG speaker wire at the terminals and a 150 A fuse. Fit the main fuse close to the battery, keep the ground short and on bare metal, and set gains with a test tone or oscilloscope. The amplifier measures 6.1 x 10.56 x 2.01 in (W x L x H).
How it compares
Other multi-channel options at VA3 Car Studio:
AudioControl EPICFOUR: 4 x 100 W RMS at 4 ohm, 4 x 200 W at 2 ohm, ₹31,440
AudioControl EPICFIVE: 4 x 75 W + 1 x 300 W RMS at 4 ohm, 4 x 150 W + 1 x 500 W at 2 ohm, 1 x 700 W at 1 ohm, ₹42,490
AudioControl A600.4: 4 x 100 W RMS at 4 ohm, 4 x 150 W at 2 ohm, ₹38,240
AudioControl A1100.5: 4 x 90 W + 1 x 400 W RMS at 4 ohm, 4 x 125 W + 1 x 600 W at 2 ohm, ₹55,240
The Altitude amplifiers add speaker-level inputs, Valet Mode and start-stop compliance; the EPIC models give more power for the money when you already have preamp outputs.
Price and value in India
At the time of writing (October 2026), VA3 Car Studio lists the EPICBIGFOUR at ₹50,990, 15% below the MRP of ₹59,990. The EPIC range gives a lot of power for the money, provided your system already has preamp outputs. Prices can change, so the product page always shows the current price.
Verdict: who should shortlist the EPICBIGFOUR
Shortlist the EPICBIGFOUR for a loud, compact system fed from an aftermarket head unit or a processor. If you are keeping the factory head unit, add a line output converter or consider an amplifier with speaker-level inputs.
Real-world reviews and limitations
We have not yet published a VA3 installation report for the EPICBIGFOUR. The figures in this review are AudioControl's published specifications, not our own measurements, and real-world results depend on the installation, the wiring and the tune. If you have used one, we would welcome your feedback.
Frequently asked questions
How much power does the EPICBIGFOUR deliver?
4 x 200 W RMS at 4 ohm, 4 x 350 W RMS at 2 ohm and 2 x 650 W bridged at 4 ohm (14.4 V).
Can the EPICBIGFOUR connect to a factory head unit?
Its inputs are line level (500 mV – 12 V RMS). With a factory head unit, use a line output converter such as the AudioControl LC2i PRO.
Is the EPICBIGFOUR 2-ohm stable?
Yes. AudioControl rates it at 4 x 350 W RMS at 2 ohm.
What fuse does the EPICBIGFOUR need?
AudioControl recommends a 150 A fuse with 4 AWG power and ground wire.
Sources, pricing and related reading
Buy the AudioControl EPICBIGFOUR 4-Channel Amplifier 1400W RMS at VA3 Car Studio
VA3 guide: Car Audio Explained, Part 12: power, clipping, gain setting and noise
VA3 guide: Do you need an amplifier in your car sound system?
Comments